Warranty

If a failure occurs that is not caused by misuse, electrolysis or damage, SWHIFT will at our option:

1. Pay for on-site repairs (maximum $75.00).
2. Repair at no charge if delivered to an authorized repair center freight pre-paid.
3. All SWHIFT pressure tanks must be installed with an operational relief with a relief pressure no higher than 60% of the factory test pressure of the tank. If the tank is pressurized over 65% of the factory test pressure all warranties are void and SWHIFT assumes no liability for damages or injuries that might occur.

Warranty on T-304 stainless applies to 1.5 ppm or less chlorine.

Warranty on T-316 applies to a maximum of 8 ppm chlorine. 316 is highly recommended for hot water.

11-9-07

Purchasing tanks from us means you agree to our condition of sale and if you resell our tanks, it is your responsibility to educate the end user of these conditions and liabilities.

CONDITION OF SALE

SWHIFT FIREPLACE SYSTEMS, INC., dba SWHIFT SYSTEMS, INC., AND LOUIE BARIBEAU ASSUMES NO LIABILITY OR RESPONSIBILITY FOR ANY DAMAGES,  INJURIES OR ANY RELATED COSTS OR AWARDS THAT OCCUR IF:

1. If A TANK IS SUBJECTED TO PRESSURE HIGHER THAN 70% OF THE TEST PRESSURE OF THE TANK. ALL PRESSURE TANKS MUST BE INSTALLED WITH A  RELIEF VALVE THAT IS RATED NO HIGHER THAN 60% OF THE FACTORY TEST PRESSURE.  THE OWNER OF THE TANK IS RESPONSIBLE TO INSURE THAT A PROPER RELIEF VALVE IS INSTALLED AND MAINTAINED TO BE FULLY OPERATIONAL.

2.  IF THE TANK IS SUBJECTED TO VACUUM PRESSURE AND NOT RATED BY SWHIFT SYSTEMS FOR VACUUM, ALL WARRANTIES ARE VOID.
( VACUUM TANKS REQUIRE THICKER SIDE  SHELLS).

3.  THE OWNER OF THE TANK IS SOLELY RESPONSIBLE FOR THE CHOICE OF SPECIFIC USE. COMPATIBILITY OF WHAT IS PUT IN THE TANK TO THE MATERIAL THE TANK IS CONSTRUCTED IS ARRIVED AT SOLELY THROUGH THE DECISION OF THE OWNER OF THE TANK.

4.  IF THERE IS POTENTIAL DAMAGE OR INJURY FROM A POSSIBLE LEAK, THE OWNER, OR END USER IS RESPONSIBLE TO DESIGN THE INSTALLATION TO PREVENT DAMAGE AND OR INJURY IF A LEAK OCCURS.  SWHIFT SYSTEMS INC. ASSUMES NO LIABILITY FOR DAMAGES OR INJURIES SHOULD A LEAK OCCUR.

5.  IF A TANK MANUFACTURED BY SWHIFT SYSTEMS, INC., IS RESOLD THE SELLER MAY TRANSFER LIABILITY THE NEW OWNER BY HAVING THE NEW OWNER  SIGN A COPY OF THIS CONDITION OF SALE. 

6. IT IS AGREED THAT ANY AND ALL POSSIBLE LITIGATION SHALL BE CONDUCTED IN BONNER COUNTY, IDAHO.

Signed____________________________________________     Date________________

Print Name__________________________________ Company_____________________

Address_________________________________________________________________