Projects & Fabrication Gallery
Real tanks, real shop, real installations. Every photograph on this site is our own work — there is no stock photography anywhere on it.
Selected work
What comes out of the building
Large-diameter tank with a hinged access lid, sanitary top fitting and welded lifting handle.
Non-pressure tanks
Jacketed vertical vessel with a side manway, sanitary connections and an integrated pump set.
Chiller tanks
Extractor vessel on fabricated legs, discharging into a clamped collection vessel below.
Extractor tanksHeat exchange coil built in-house and mounted on welded rails inside a rectangular tank.
Custom fabrication
Horizontal pressure tank cradled, crated and strapped down for shipping.
Pressure tanks
A pair of rectangular non-pressure tanks with removable lids, crated and ready to leave.
Non-pressure tanks
Ozone contact vessel built into a packaged water treatment skid.
Ozone contact tanks
Ozone contact tank installed in a commercial laundry, plumbed to the wash line.
Healthcare
Rectangular storage tank on site, with the copper supply and return manifold made up.
Solar hot water tanks
A large rectangular tank loaded out — too big for a doorway, which is why it was built rectangular.
Non-pressure tanks
Looking into a finished tank through a six-inch port at the heat exchange coils.
Solar hot water tanks
Custom rectangular vessel with a full coupling schedule and a flanged inlet.
Custom fabrication
Custom stainless door with a CNC-cut decorative panel, built for a restaurant entry.
CNC fabrication
A pair of vertical tanks in a Soft Swirl finish, marked and ready to ship.
Softener tanks
Polished vertical vessel with a three-port domed head, on the pallet before crating.
Vacuum tanks
Dimple-jacketed vessel with a fabricated side connection, mid-build.
Chiller tanks
A small horizontal tank with threaded ports and welded feet — the same construction, scaled down.
RV water tanks
Round tank with a lift-off lid on fabricated legs and casters.
Custom fabrication
Finishing work on a horizontal shell. Nothing leaves the shop without being checked.
About Swhift
A hand-welded fitting. Every fitting on every tank is welded in by hand.
How we build
Every tank leaves marked, so whoever services it in fifteen years knows who to call.
Contact us
Start a project
Want something like one of these?
Point at the photograph that is closest to what you need and tell us what has to change. That is often the fastest way to get to an accurate quote.
Consultations are free. Every project is managed by a single production manager, so you talk to the person who knows your job.